Selec RPS40-24-CE, 40Watt 24V/1.67A Power Supply, DIN Rail Mount
Selec RPS40-24-CE, 40Watt 24V/1.67A Power Supply, DIN Rail Mount

Selec RPS40-24-CE, 40Watt 24V/1.67A Power Supply, DIN Rail Mount

Out of stock
SKU
RPS40-24-CE
Special Price ₹930.72 Regular Price ₹1,939.00
(18% GST Extra)
  • Supports 90 - 264 VAC / 127 - 370 VDC
  • Efficiencies up to 85 %
  • Protection against short circuit, overload
  • Cooling by free air convection
  • Full power between -25°C to +50°C

FREE SHIPPING

Free Shipping by Surface Only*

SECURE PAYMENT

100% Secure Payment

Input Voltage 90 - 264 VAC (127 - 370 VDC)
Input Frequency 50/60 Hz
Inrush Current < 60 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
DC output Voltage, Current 24 V / 1.67 A
Output Power 40 W
Voltage Tolerance ± 1 %
Line Regulation ± 1 %
Load Regulation ± 1 %
Turn On Time < 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
Hold Up Time ≥ 25 ms @ 230 VAC & ≥ 6 ms @ 115 VAC, Full load
Rise Time < 100 ms
Overload Protection > 110 % of rated output current; Hiccup mode; Autorecovery type
Overtemperature Protection Power supply shuts down when the temperature of PCB below main transformer reaches typically 120°C;
Turns on only after the temperature falls below 90°C typically and AC power is recycled thereafter
Overvoltage Protection Hiccup mode when output over voltage occur; Autorecovery type
Output Short Circuit Protection Hiccup mode when output is shorted; Autorecovery type.
Operating Temperature - 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C.
-25°C to 0°C startup is guaranteed with specification deviation(Output ripple can be more than 10 % of the output voltage.)
Storage Temperature - 40°C to + 85°C
Cooling Natural convection cooled
Humidity 5 to 95 % RH, Non condensing
Altitude 2000 m
Dimension 35 x 90 x 60 mm ( W x H x D )
Weight < 150 gms
< 150 gms 35 mm DIN Rail
Product Code Description Certification
RPS40-12-CE 30 W, 12 V / 2.5 A DIN rail mounted Power supply in plastic Housing CE
RPS40-15-CE 40 W, 15 V / 2.67 A DIN rail mounted Power supply in plastic Housing CE
RPS40-24-CE 40 W, 24 V/ 1.67 A DIN rail mounted Power supply in plastic Housing CE
RPS40-48-CE 40 W, 48 V / 0.83 A DIN rail mounted Power supply in plastic Housing CE
Write Your Own Review
You're reviewing:Selec RPS40-24-CE, 40Watt 24V/1.67A Power Supply, DIN Rail Mount
Your Rating